Civil security delivery rubber hoses

This very robust hose is swaged with half-symetrical guillemin fittings in diameters 40 and 70, and with AR fittings in diameter 100 in order to obtain hose assemblies for civil protection equipment.
These are in accordance with NFS 61113 and the new NF EN ISO 14557 standard.
The conformity of these products with the ISO 14557 standard is guranteed by AFNOR Certification who have authorised the NF logo on these hoses.

Technical specifications :
Inner tube : smooth sbr rubber
Reinforcement : 4 textile plies and metal spiral
Outer cover : abrasion and weather resistant sbr rubber
Admissible negative pressure : 0.9 bars
Outer finish : wrapped
Temperature : 90°C maximum
Production lengths : 2 metres
Colour : black
Embossed marking : According to the norm
White layline marking : According to the norm

Possible end-fittings : half-symetrical guillemin fitting dia. 40 & 65 & ar setting dia. 100

Ref 114 hose is used on fire department hose reels for delivery of water at 40 bars.
This hose has been approved by the French interior ministry for use by civil protection services.
This hose conforms to NF EN 1947 class 1 standards (its inner tube and outer cover are in rubber) category 2 and type C (wp 40 bars and minimum burst pressure 120 bars) : it is therefore a high quality hose.
Compared with the red PVC hose which is usually found on booster lines, this hose has many advantages :
- same flexibility during high summer temperatures or during the winter colds,
- same working pressure at 20°C or 90°C, better fire-resistance, bend radius and resistance to deformation.
It has less “reel-shape memory”, which facilitates use in stairways during interventions on fires in garbage chutes.

Technical specifications :
Inner tube : black SBR rubber
Reinforcement : textile plies
Outer cover : black CR abrasion reistant rubber
Outer finish : fine tape-wrapped
Temperature : 0°C to 90°C
Production lengths : 60 metres
Colour : black
Embossed marking : According to the norm
Marking on white lay line : According to the norm

Possible end-fittings : GFR, threaded

The semi-rigid (TSR) hoses REF 995 25 and REF 996 25 are used for fire fighting application in fire reels.
These are in accordance with NF EN 1947 + A1 classe 2 standard.
Hose 995 25 is Class 1 and hose 996 25 is Class 2.

Technical specifications :
Inner tube : black PVC
Reinforcement : 1 textile braid
Outer cover : PVC, flame resistant
Outer finish : smooth
Temperature : -20°c à + 60°c
Production lengths : 20, 30, 40 metres
Colour : red or black on request
Marking 995 : According to the norm
Marking 996 : According to the norm

Possible end-fittings : threaded, GFR, Half-symetrical guillemin

The hose 997 are intended for RIA equipment (fire taps reinforced) and PIA (fire stations additive) found in some place of public assembly.
These are in accordance NF EN694 + A1 (NFS 61 115) type A classe 2 standard.

Technical specifications :
Inner tube : black PVC
Reinforcement : 1 textile braid
Outer cover : PVC, flame resistant
Outer finish : smooth
Temperature : -20°c à + 60°c
Production lengths : 20 mètres
Colour : red
Marking : Tecalemit - EN 694 : 2001 - A - 2 - Ø - MPA & bar pressure - trimester/year - Batch N°

Possible end-fittings : threaded, GFR, Half-symetrical guillemin