Rubber hose – Flexible hose high pressure – Hose assemblies – Quick coupling – Flexibles for fluid transfer
Tuyaux flexibles eau Tuyaux flexibles Abrasifs Tuyaux flexibles Siderurgie Tuyaux flexibles Air Gaz Tuyaux flexibles Vapeur Tuyaux flexibles Chimie
Tuyaux flexibles Hydrocarbures Tuyaux flexibles Alimentaire Tuyaux flexibles Marine Tuyaux flexibles Securite civile Tuyaux flexibles off shore Guide technique

Chemical delivery rubber hoses

Intended for the suction and delivery of hydrocarbons, the Ref 603 hose has 2 textile plies and a stainless steel spiral.
Its NBR inner tube is conductive and resistant to LPG.
It can be used in a wide temperature range and its special synthetic microperforated rubber cover ensures excellent resistance to ozone, oils, heat, flame and atmospheric agents.
It complies with standard NF EN 1762 type SD (suction and delivery).


Technical specifications :
Inner tube: conductive NBR rubber
Reinforcement: 2 textile plies and 1 stainless steel spiral
Aouter cover: special synthetic rubber
Outer finish : wrapped, smooth
Température : -30°C to +70°C
Production lengths : 40 meters
Colour : black
Marking : Tecalemit 603 - LPG - TS EN 1762 - type SD Ω - WP 25 bars

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar bar mm kg/m
603SD 12,7 1/2" 23 5,1 25 100 -0,8 90 0,4
603SD 16 5/8" 26 5 25 100 -0,8 95 0,5
603SD 19 3/4" 31 6 25 100 -0,8 100 0,7
603SD 25,4 1" 38 6,3 25 100 -0,8 150 0,9
603SD 32 1"1/4 45 6,5 25 100 -0,8 200 1,2
603SD 38 1"1/2 52 7 25 100 -0,8 280 1,5
603SD 50,8 2" 67 8,1 25 100 -0,8 350 2,2
603SD 63,5 2"1/2 81 8,7 25 100 -0,8 480 2,9
603SD 76,2 3" 94 8,9 25 100 -0,8 520 3,5
603SD 101,6 4" 120 9,2 25 100 -0,8 720 4,5
603SD 152 6" 180 14 25 100 -0,8 1100 11,5
603SD 203 8" 238 17,5 25 100 -0,8 1600 18,0

Possible end-fittings : threaded, flange, ...

Intended for the suction and discharge of many solvents and chemicals thanks to its white UHMW-PE internal tube, the 609 hose has 4 textile plies and a steel spiral.
Its electrical continuity is ensured by a copper alloy ground wire interposed between the textile plies.
Its flat corrugated EPDM rubber coating is resistant to abrasion, ozone and atmospheric agents.
It is produced in accordance with standard EN 12115 and is food grade.
We fit it with symmetrical crimped fittings and deliver it with certificates in accordance with appendix IV-1 of the TDG order of May 29, 2009 as amended.

Technical specifications :
Inner tube : UHMW PE White
Renforcement : 4 high tensile synthetic textile, steel wire helix
Electrical continuity : antistatic copper wire
Outer cover : black EPDM rubber
Outer finish : wrapped
Temperature : -40°C +80°C
Production lengths : 40 meters
Colour : Black
Marking : Tecalemit by sel - EN 12115 - UPE - Diam - 10 Bars - M - food symbol I
nlay marking: Quarter / year - Batch N°


Part n° Inner
diameterr
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
609 38 38 1"1/2 51 6,5 10 40 175 1,23
609 50 51 2" 64 6,5 10 40 250 1,90
609 63 63 2"1/2 79 8,0 10 40 450 2,30
609 75 76,2 3" 91 7,5 10 40 450 2,90
609 100 102 4" 119 8,,5 10 40 650 4,2
609 150 152 6" 174 11 10 40 1000 8,00

Possible end-fittings : Threaded, flanges,...

Hose 680 is suitable for the transfer of most chemicals, depending on the resistance table.
Its smooth PTFE tube is coextruded in white color Its outer cover is slightly wavy
This hose is used in the chemical industry but also in the pharmaceutical, food and cosmetic industries
It is produced in accordance with standard EN 12115.

Technical specifications :
Inner tube : white PTFE
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire
Outer cover : Conductive EPDM
Outer finish : semi-corrugated wrapped
Temperature : -40°C to + 150°C
Production lengths : 40 meters
Colour : black
Marking : Tecalemit - Part N°- DN (mm/inch) - PS 10 bars - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
680 13 13 1/2" 25 6 10 40 55 0,5
680 19 19 3/4" 31 6 10 40 75 0,6
680 25 25 1" 37 6 10 40 95 0,8
680 32 32 1"1/4 44 6 10 40 115 0,9
680 38 38 1"1/2 51 6,5 10 40 140 1,2
680 50 50 2" 66 8 10 40 190 2,0
680 63,5 63,5 2"1/2 79,5 8 10 40 245 2,5
680 75 75 3" 91 8 10 40 330 3,0
680 100 100 4" 116 8 10 40 475 3,8

Possible end-fittings : Threaded, guillemin, Todo, flanges

This hose is intended for aspiration and delivery chemical corrosive products of certain solvents.
The rubber collars molded at the tips prevent contact of the corrosive fluid with the metal clamp consisting of two half clamps, made indifferently according to EN 1092 (PN designated flanges) or EN 1759 (Class designated flanges).
The lengths can be produced with a UHMWPE (high molecular weight polyethylene) tube, or EPDM or XLPE (film-coated polyethylene) depending on the fluid conveyed.

Technical specifications :
Inner tube: special synthetic rubber EPDM or UHMW-PE
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire
Outer cover: abrasion, ozone and weather resistant special synthetic rubber
Outer finish : wrapped
Temperature: - 40°C to +65°C
Production lengths: 1,5 m to 20 m until 8’’. 1,5 m to 10 m for 10’’ and 12’’
Colour : black
Marking : Tecalemit - Part N°- DN (mm/inch) - PS (bars) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Inch mm bar bar bar mm kg/m
687 80 80 3’’1/8 103 10 40 -0,80 350 4,1
687 100 101,6 4’’ 126 10 40 -0,80 500 5,5
687 127 127 5’’ 155 10 40 -0,80 600 8,1
687 150 152,4 6’’ 183 10 40 -0,80 750 10,4
687 200 203 8’’ 236 10 40 -0,80 1100 15,3
687 250 254 10’’ 291 10 40 -0,80 1500 20,7
687 300 298 12’’ 336 10 40 -0,80 1800 26,0

Possible end-fittings : flanges