Rubber hose – Flexible hose high pressure – Hose assemblies – Quick coupling – Flexibles for fluid transfer
Tuyaux flexibles eau Tuyaux flexibles Abrasifs Tuyaux flexibles Siderurgie Tuyaux flexibles Air Gaz Tuyaux flexibles Vapeur Tuyaux flexibles Chimie
Tuyaux flexibles Hydrocarbures Tuyaux flexibles Alimentaire Tuyaux flexibles Marine Tuyaux flexibles Securite civile Tuyaux flexibles off shore Guide technique

Transfer of dangerous gods

401 tuyaux flexibles 403 tuyaux flexibles 416 tuyaux flexibles 495 tuyaux flexibles

403
HYDROCARBON DELIVERY HOSE NF EN 1360 TYPE 1
16 BARS

Measured fuel distribution (Working pressure : 16 bars / diameters : 32 to 35 mm)
These hoses are made with 1 ’½’ male or female threaded fittings in zinc-plated steel with aluminum covers and galvanized steel bending spring.
Substances that can be transferred have N° ONU 1202, 1203, 1999, 1223, et 1267 and are all Class 3.

   
403 tuyau flexible caoutchouc norme

EN1360:2013

The hose 403 is intended for the equipment of the reels of the fuel distribution tankers.
Manufactured in accordance with the EN 1360: 2013 standard, in the lightest possible way, it has a very thin striped rubber coating very resistant to abrasion.
We deliver it fitted with male or female male or female BSPP fittings 1''1/2 in steel and certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
The male threaded end is equipped with a bending spring.

Technical specifications :
Inner tube : black NBR noir rubber conductor
Reinforcement : 2 textile plies
Recouvrement : caoutchouc synthétique
Outer finish : wrapped
Electrical resistance : less than 1 Mega Ω per meter
Temperature : - 30°C to 70°C
Production length: 50, 60 meters
Colour : black
Red tape marking : Tecalemit - 403 - Hydrocarbures - 16 bar
Inlay marking : SEL - 403 35 - EN1360:2013 - Type 1 - 35 mm - 16 Bars - Ω - TRIM/AN - N° Lot

Part n° Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm bar bar mm kg/m
*403 32 32 1"1/4 45 16 48 175 1100
*403 35 35 1"3/8 48 16 48 175 1100
403 38 38 1"1/2 51 16 48 225 1235
403 40 40 1"9/16 53 16 48 225 1292

* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009